background image

12

INSTALLATION / CONNECTION

Do the required 
wiring. 

(

 

13)

Dashboard of 
your car

Bend the appropriate tabs to hold 
the mounting sleeve firmly in place.

How to remove the unit

Detach the faceplate.

Fit the catch pin on the extraction 
keys into the holes on both sides of 
the trim plate, then pull it out.

Insert the extraction keys deeply into 
the slots on each side, then follow 
the arrows as shown on the right.

Installating the unit (in-dash mounting)

 Warning

•  The unit can only be used with a 12 V DC power supply, negative 

ground.

•  Disconnect the battery’s negative terminal before wiring and 

mounting.

•  Do not connect Battery wire (yellow) and Ignition wire (red) to the car 

chassis or Ground wire (black) to prevent a short circuit.

•  Insulate unconnected wires with vinyl tape to prevent a short circuit.
•  Be sure to ground this unit to the car’s chassis again after installation.

 Caution

•  For safety’s sake, leave wiring and mounting to professionals. Consult 

the car audio dealer.

•  Install this unit in the console of your vehicle. Do not touch the metal 

parts of this unit during and shortly after use of the unit. Metal parts 
such as the heat sink and enclosure become hot.

•  Do not connect the 

·

 wires of speaker to the car chassis, Ground wire 

(black), or in parallel.

• 

Mount the unit with the angle of 30º or less.

•  If your vehicle wiring harness does not have the ignition terminal, 

connect Ignition wire (red) to the terminal on the vehicle’s fuse box 
which provides 12 V DC power supply and is turned on and off by the 
ignition key.

•  After the unit is installed, check whether the brake lamps, blinkers, 

wipers, etc. on the car are working properly.

•  If the fuse blows, first make sure the wires are not touching car’s 

chassis, then replace the old fuse with one that has the same rating.

Basic procedure

Remove the key from the ignition switch, then 
disconnect the 

·

 terminal of the car battery.

Connect the wires properly.

 

  See Wiring connection. 

(

 

13)

Install the unit to your car.

 

  See Installing the unit (in-dash mounting).

Connect the 

·

 terminal of the car battery.

Reset the unit. 

(

 

3)

Hook on the top side

Orientate the trim plate as 
illustrated before fitting.

EN_KDC-4757SD[E0]1.indd   12

EN_KDC-4757SD[E0]1.indd   12

8/14/12   3:38:36 PM

8/14/12   3:38:36 PM

Summary of Contents for KDC-3657SD
















Reviews: