Kenwood KDC-3051M Instruction Manual Download Page 8

8

Adjust [SETTINGS] mode settings

While listening to the radio...

Press the volume knob to enter 

[FUNCTION]

 mode.

Turn the volume knob to select 

[SETTINGS]

, then press to enter.

Turn the volume knob to make a selection, then press to confirm.

  See table below for selection.

Hold 

 to finish the procedure.

Item

Selectable setting (Preset: *)

LOCAL SEEK

ON:

 Searches only stations with good reception (

KDC-MP249/ KDC-MP2049/ KDC-MP149:

 MW/ SW1/ 

SW2 stations only ;

 KDC-3051M/ KDC-315M:

 FM stations only). ; 

OFF *:

 

Cancels.

SEEK MODE

Selects the tuning mode for 

4

 / 

¢

 buttons.

AUTO1 *:

 Automatically search for a station. ; 

AUTO2:

 Search in the order of the stations in the preset 

memory. ; 

MANUAL:

 Manually search for a station.

AUTO MEMORY YES:

 Automatically starts memorizing 6 stations with good reception. ; 

NO *:

 

Cancels (automatic 

memorizing is not activated). (Selectable only if 

[NORM]

 is selected for 

[PRESET TYPE]

.) (page 6)

MONO SET

ON:

 Improves the FM reception (but the stereo effect may be lost). ; 

OFF *:

 Cancels (stereo effect resumes).

PTY SEARCH

Selects the available Program Type (see table below). Then, press 

4

 / 

¢

 to start searching.

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language 

(ENGLISH */ FRENCH/ GERMAN)

, then press to confirm.

NEWS SET

0M – 90M:

 Sets the time for receiving the next news bulletin. ; 

OFF *:

 Cancels.

AF SET

ON *:

 Automatically searches for another station broadcasting the same program in the same RDS network 

with better reception when the current reception is poor. ; 

OFF:

 

Cancels.

RDS REG

ON *:

 Switches to another station only in the specific region using the “AF” control. ; 

OFF:

 Cancels.

ATP SEEK

ON *:

 Automatically searches for a station with better reception when the traffic information's reception is 

poor. ; 

OFF:

 Cancels.

 

[PTY SEARCH/ NEWS SET/ AF SET/ RDS REG/ ATP SEEK]

 is selectable only for 

KDC-3051M/ KDC-315M

.

 

[PTY SEARCH]

 is selectable only when the source is “FM.”

 

[NEWS SET/ AF SET/ RDS REG/ ATP SEEK]

 is selectable only when the source is “FM.” If other playback source is selected, 

these settings are selectable under 

[RDS SET]

 item. (page 12)

For KDC-3051M/ KDC-315M:

 

Available Program Type:

SPEECH

MUSIC

NEWS

AFFAIRS

INFO

SPORT

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

POP M (music) ROCK M (music) EASY M (music)

LIGHT M (music) CLASSICS

OTHER M (music)

WEATHER

FINANCE

CHILDREN

SOCIAL

RELIGION

PHONE IN

TRAVEL

LEISURE

JAZZ

COUNTRY

NATION M (music)

OLDIES

FOLK M (music)

DOCUMENT

  The unit will search for the Program type categorized under 

[SPEECH]

 or 

[MUSIC]

 if selected.

 

[SPEECH]

 : White character item. ; 

[MUSIC]

 : Black character item.

 The RDS feature won't work where the service is not supported by any broadcasting station.
 If the volume is adjusted during reception of traffic information, the adjusted volume is 

memorized automatically. It will be applied the next time Traffic Information function is 
turned on.

Using the remote controller (RC-405)
FM+ / AM– 

:

 Selects band.

4

 / 

¢

  ( + )  :

 Selects station.

1 – 6 

:

  Selects preset station.

EN02-15_KDC-MP249[M]f.indd   8

EN02-15_KDC-MP249[M]f.indd   8

8/3/10   10:16:57 AM

8/3/10   10:16:57 AM

Summary of Contents for KDC-3051M
















Reviews: