ENGLISH
15
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P. CONT
ANT CONT
MUTE
Wiring connection
When connecting to an external amplifier, connect
its ground wire to the car’s chassis to avoid damaging
the unit.
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult
your car audio dealer.
Pin
Color and function
A4
Yellow
: Battery
A5
Blue/White*
1
: Power control
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
B1
Purple
]
: Rear speaker (right)
B2
Purple/black
[
B3
Gray
]
: Front speaker (right)
B4
Gray/black
[
B5
White
]
: Front speaker (left)
B6
White/black
[
B7
Green
]
: Rear speaker (left)
B8
Green/black
[
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire (Red)
A4 (Yellow)
Default wiring
Battery wire (Yellow)
Light blue/yellow
(Steering remote
control wire)
To the steering wheel remote control adapter
Blue/White*
2
(Power control wire/
Antenna control wire)
Brown
(Mute control wire)
To the power control terminal when using the
optional power amplifier or to the antenna control
terminal in the vehicle
To the terminal that is grounded when the telephone
rings or during conversation
( 17)
(To connect the Kenwood navigation system, refer
your navigations manual.)
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
ISO
connectors
If no connections are made, do not let the wire come out from the tab.
Fuse (10 A)
Antenna terminal
Output terminals
INSTALLATION/CONNECTION
NOTE: Total output for Blue/White wire (*
1
) + (*
2
) is 12 V
350 mA
JS_KWD_KDC_220UI_ENE2N_EN_4.indd 15
JS_KWD_KDC_220UI_ENE2N_EN_4.indd 15
7/13/2017 11:05:22 AM
7/13/2017 11:05:22 AM
