10
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select [
AUDIO CONTROL
], then press the knob.
For
/
, pressing
AUD
enter [
AUDIO CONTROL
]
directly.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Repeat step
3
until the desired item is selected or activated.
5
Press and hold
to exit.
(or using RC-406) (for
)
1
Press
AUD
to enter [
AUDIO CONTROL
].
2
Press
J
/
K
to make a selection, then press
.
To return to the previous setting item, press
.
Default:
XX
SUB-W LEVEL
–15
to
+15
(
0
)
Adjusts the subwoofer output level.
BASS LEVEL
–8
to
+8
(
+6
)
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want to
adjust.)
MID LEVEL
–8
to
+8
(
+5
)
TRE LEVEL
–8
to
+8
(
0
)
EQ PRO
BASS ADJUST
BASS CTR FRQ
60
/
80
/
100
/
200
or
60HZ
/
80HZ
/
100HZ
/
200HZ
:
Selects the center frequency.
BASS LEVEL
–8
to
+8
(
+6
): Adjusts the level.
BASS Q FACTOR
1.00
/
1.25
/
1.50
/
2.00
: Adjusts the quality factor.
BASS EXTEND
ON
: Turns on the extended bass. ;
OFF
: Cancels.
MID ADJUST
MID CTR FRQ
0.5K
/
1.0K
/
1.5K
/
2.5K
or
0.5KHZ
/
1.0KHZ
/
1.5KHZ
/
2.5KHZ
: Selects the center frequency.
MID LEVEL
–8
to
+8
(
+5
): Adjusts the level.
MID Q FACTOR
0.75
/
1.00
/
1.25
: Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ
10.0K
/
12.5K
/
15.0K
/
17.5K
or
10.0KHZ
/
12.5KHZ
/
15.0KHZ
/
17.5KHZ
: Selects the center frequency.
TRE LEVEL
–8
to
+8
(
0
): Adjusts the level.
PRESET EQ
DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
: Selects a preset equalizer suitable to the music
genre. (Select [
USER
] to use the customized settings.)
[
DRIVE EQ
] is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
BASS BOOST
LV1
/
LV2
/
LV3
or
LEVEL1
/
LEVEL2
/
LEVEL3
: Selects your preferred
bass boost level. ;
OFF
: Cancels.
LOUDNESS
LV1
/
LV2
or
LEVEL1
/
LEVEL2
: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ;
OFF
: Cancels.
SUBWOOFER SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
LPF SUBWOOFER
THROUGH
: All signals are sent to the subwoofer. ;
85HZ
/
120HZ
/
160HZ
: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.
SUB-W PHASE
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum
performance. (Selectable only if a setting other than [
THROUGH
] is
selected for [
LPF SUBWOOFER
].)
HPF
(For
)
THROUGH
: All signals are sent to the speakers. ;
100HZ
/
120HZ
/
150HZ
: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
FADER
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME OFFSET
For AUX:
–8
to
+8
(
0
) ; For other sources:
–8
to
0
: Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
SOUND RECNSTR
(Sound
reconstruction)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF
: Cancels.
• [
SUB-W LEVEL
]/ [
SUBWOOFER SET
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is
selectable only if [
SWITCH PREOUT
] is set to [
SUB-W
]. (
4
)
• [
SUB-W LEVEL
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is selectable only if
[
SUBWOOFER SET
] is set to [
ON
].
JS_KWD_KDC_364U_EN_EN_04.indd 10
JS_KWD_KDC_364U_EN_EN_04.indd 10
12/7/2014 9:03:50 PM
12/7/2014 9:03:50 PM
