manualshive.com logo in svg

Kenwood KDC-115S, Instruction Manual

Share
Download
Kenwood KDC-115S Instruction Manual Download Page 19

— 19 —

FM tuner section

Frequency range (200 kHz space) .............87.9 MHz – 107.9 MHz
Usable sensitivity (S/N = 30dB).....................9.3dBf (0.8 µV/75 

Ω

)

Quieting Sensitivity (S/N = 50dB) ................15.2dBf (1.6 µV/75 

Ω

)

Frequency response (±3.0 dB) ..............................30 Hz – 15 kHz
Signal to Noise ratio (MONO) ..............................................70 dB
Selectivity (±400 kHz) .......................................................

≥

80 dB

Stereo separation (1 kHz).....................................................40 dB

AM tuner section

Frequency range (10 kHz space) ....................530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB) .............................28 dBµ (25 µV)

CD player section

Laser diode ....................................................GaAlAs (

λ

=780 nm)

Digital filter (D/A) ......................................8 Times Over Sampling
D/A Converter .......................................................................1 Bit
Spindle speed ...............................................500 – 200 rpm (CLV)
Wow & Flutter ........................................Below Measurable Limit
Frequency response (±1 dB) .................................10 Hz – 20 kHz
Total harmonic distortion (1 kHz)  ......................................0.01 %
Signal to Noise ratio.................................................96 dB (1 kHz)
Dynamic range ....................................................................93 dB
Channel separation ..............................................................85 dB

Audio section

Maximum output power .................................................45 W 

×

4

Full bandwidth power (at less than 1% THD)..................22 W 

×

4

Tone action

Bass: ...........................................................100 Hz ±10 dB
Treble: .........................................................10 kHz ±10 dB

Preout level / Load..................................................1800mV/10k

Ω

Preout impedance ............................................................

≤

600 

Ω

General

Operating voltage ..............................14.4 V (11 – 16 V allowable)
Current consumption .............................................................10 A
Installation size (W 

×

H 

×

D) ...........................182 

×

53 

×

160 mm

7-3/16 

×

2-1/16 

×

6-5/16 in.

Weight..................................................................3.1 Lbs (1.4 kg)

Specifications subject to change without notice.

Specifications

KDC-115S_U.S  00.12.26 3:40 PM  Page 19

Summary of Contents for KDC-115S






















Reviews:

No comments

Brands by name

Popular brands

Load more brands