4
GETTING STARTED
Set the initial settings
1
Press
SRC
to enter
[STANDBY]
.
2
Press the volume knob to enter
[FUNCTION]
.
3
Turn the volume knob to select
[INITIAL]
, then press the knob.
4
Turn the volume knob to make a selection (see the table below), then press
the knob.
5
Press and hold
to exit.
• To return to the previous hierarchy, press
.
Default:
XX
PRESET
TYPE NML
: Memorizes one station for each preset button in each band (FM1/ FM2/
FM3/ AM). ;
TYPE
MIX
: Memorizes one station for each preset button regardless of the
selected band.
KEY BEEP
BEEP ON
: Activates the keypress tone. ;
BEEP
OFF
: Deactivates.
AUX SET
AUX ON
: Enables AUX in source selection. ;
AUX
OFF
: Disables.
(
➜
7)
CD READ
CD READ 1
: Automatically distinguishes between audio file disc and music CD. ;
CD READ
2
: Forces to play as a music CD. No sound can be heard if an audio file disc is
played.
SWPRE
SWPRE R
/
SWPRE
SW
: Selects whether rear speakers or a subwoofer are connected to
the line out terminals on the rear (through an external amplifier).
SPEAKER
SP OFF
/
SP
5/4
/
SP
6 × 9/6
/
SP
OEM
: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
F/W UP
F/W xx.xx
<Y>/N
: Starts upgrading the firmware. ;
Y/<N>
: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
3
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL”
\
“DEMO”
\
“PRESS”
\
“VOLUME”
\
“KNOB”
1
Press the volume knob.
[<Y>/N]
is selected for the initial setup.
2
Press the volume knob again.
“DEMO OFF” appears.
Set the clock
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[SETTINGS]
, then press the knob.
3
Turn the volume knob to select
[CLOCK]
, then press the knob.
4
Press the volume knob to select
[CLK ADJ]
.
5
Turn the volume knob to adjust the hour, then press the knob.
6
Turn the volume knob to adjust the minute, then press the knob.
Press
4
/
¢
to move between the hour and minute adjustment.
7
Press and hold
to exit.
(or)
Press and hold
SCRL DISP
to enter clock adjustment mode
directly while in clock display screen.
Then, perform steps
5
and
6
above to set the clock.
1
2
EN_KDC-105U[K0]f.indd 4
EN_KDC-105U[K0]f.indd 4
8/14/12 2:34:27 PM
8/14/12 2:34:27 PM
