20
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P. CONT
ANT CONT
MUTE
If your car does not have an ISO terminal :
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult your
car audio dealer.
INSTALLATION / CONNECTION
Wiring connection
(for
/
/
)
Fuse (10 A)
Front/ Rear/ subwoofer output
Antenna terminal
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control
wire)
To the power control terminal
when using the optional power
amplifier or to the antenna control
terminal in the vehicle
Brown
(Mute control wire)
To the terminal that is grounded
when the telephone rings or during
conversation
(
14
)
(To connect the Kenwood
navigation system, refer your
navigation manual.)
If no connections are made, do not let the wire come out from the tab.
To the steering wheel remote
control adapter
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
Pin
Color and function
A4
Yellow
: Battery
A5
Blue/White
: Power control
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
B1
Purple
]
: Rear speaker (right)
B2
Purple/black
[
B3
Gray
]
: Front speaker (right)
B4
Gray/black
[
B5
White
]
: Front speaker (left)
B6
White/black
[
B7
Green
]
: Rear speaker (left)
B8
Green/black
[
ISO connectors
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire
(Red)
A4 (Yellow)
Default wiring
Battery wire
(Yellow)
When connecting to an external amplifier, connect its
ground wire to the car’s chassis to avoid damaging the unit.
JS_KWD_KDC_1010U_MN_EN_4.indd 20
JS_KWD_KDC_1010U_MN_EN_4.indd 20
14/7/2015 4:11:35 PM
14/7/2015 4:11:35 PM
