(No.RA027<Rev.001>)1-13
SECTION 3
DISASSEMBLY
3.1
Precautions for Disassembly
3.1.1 Remove the top cover from the shield cover
(1) There are four shield covers on the Sub unit and interface
unit, the top covers can be removed.
(2) Use tweezers to slightly lift the edge of the top cover. <1>
Note:
Push evenly on the top cover and be careful that you
do not bend it as you install it on the shield cover.
(3) As you do step 2 above, vary the position you hold the top-
cover as you lift it, and remove the top cover <2>.
Note:
Once the top cover is removed, it cannot be used
again.
SECTION 4
ADJUSTMENT
This service manual does not describe ADJUSTMENT.
(There is no adjustment item on KCH-20R.)
Shield cover
Subunit
Interface unit
<
<1>
<1>
<2>
<2>
<2>
Summary of Contents for KCH-20R
Page 20: ... No RA027 Rev 001 2 2 MEMO ...
Page 37: ...MEMO ...
