1-4 (No.RA027<Rev.001>)
2.1.6 Connect the KRK-15B and KCH-20R with the KCT-71
(1) Insert one lead wire with connector of the KCT-71 into the
connector (CN3) of the KRK-15B. (Fig. 4)
Fig.4
(2) Secure the cable bush as shown in the figure 5 and attach
the waterproof packing.
Note:
There is a direction to the installing of the cable bush.
Fig.5
(3) Slide the molding cover so as not to float the waterproof
packing and attach so that it is locked. (Fig. 6)
Fig.6
(4) Insert the other lead wire with connector of the KCT-71 into
the connector (CN5) of the KCH-20R.(Fig. 7)
Fig.7
(5) Attach the waterproof packing and molding cover in the
same way of step 2 and 3.(Fig. 8) (Fig. 9)
Fig.8
Fig.9
KCT-71 lead wire with connector
KRK-15B
CN3
Waterproof Packing
Cable Bush
Molding Cover
KCH-20R
KCT-71 lead wire with connector
CN5
Summary of Contents for KCH-20R
Page 20: ... No RA027 Rev 001 2 2 MEMO ...
Page 37: ...MEMO ...
