2
PRECAUTIONS
• Do not disassemble or modify the unit for any reason.
• Do not expose the unit to long periods of direct sunlight, nor place it close to heating
appliances.
• Do not place the unit in excessively dusty and/or humid areas, nor on unstable surfaces.
• If you detect an abnormal odor or smoke coming from the unit, disconnect the power
from the unit immediately. Contact your
KENWOOD
service center or dealer.
• Do not attempt to configure the transceiver while driving; it is too dangerous.
• Do not use options not specified by
KENWOOD.
• For passenger safety, install the unit securely using the supplied mounting bracket and
screw set so the unit will not break loose in the event of a collision.
• Always turn off the power before installing optional accessories.
• When using the KCH-20R, refer to the “NOTICES TO THE USER” and
“PRECAUTIONS” in the USER GUIDE of Mobile Transceiver of NX-5000 series. If
the warnings (
) are not observed, there may be the possibility to have any
malfunction. In this case, press and hold the Power Switch for 5 seconds or more. If the
malfunction persists, ask your dealer.
SUPPLIED ACCESSORIES
a
Mounting bracket ..........................................................................................................
1
b
Mounting screw .............................................................................................................
2
c
Screw set (5 x 16 mm self-tapping screw x 4, Spring washer x 4, Flat washer x 4) ....
1
d
Microphone cable holder ...............................................................................................
1
e
Pan head sems screw (M3 x 8 mm)..............................................................................
1
f
PF name plates (the A, B and C name plate has been attached).................................
1
a
b
d
e
c
f
e
d
Microphone
cable
