KCH-14/15
3
Precautions for Reassembly
■
Procedure when the packing (G53-0838-13) is
removed from the Panel ASSY
When the packing is removed from panel ASSY, affix
new sheet (G11-4376-04) to the panel ASSY by following
procedures.
1. Remove the white covering paper from the short side of
the sheet
z
.
2. Place the sheet on the edge of the panel ASSY
x
, then
affix it to one side of panel ASSY while pulling the right
and left sides of the transparent covering paper to make a
smooth contact (with no wrinkles)
c
.
Firmly affix the sheet to the panel ASSY by pushing the
double-coated tape with your fingers.
3. Remove the white covering paper from the other side of
the sheet
v
, then affix it to the other side of panel ASSY
b
.
Note:
Affix it while pulling the right and left sides of the
transparent covering paper to make a smooth contact
(with no wrinkles).
Firmly affix the sheet to the panel ASSY by pushing the
double-coated tape with your fingers.
4. Remove the transparent covering paper from the panel
ASSY
n
.
DISASSEMBLY FOR REPAIR
3
3
2
2
1
1
6
4
5
4
■
Affixing the ring sheet (G11-4380-14)
Affix it to the backside of the microphone jack on the
panel ASSY so that the ring sheet fits to the position as
shown in figure.
ring
sheet
Affix the ring sheet while
two positions of the ring sheet
are touching to the panel.