Kenwood KCA-RC55MR Instruction Manual Download Page 4

Page: 4 / 5

This white paper explains how to connect a Kenwood KCA-
RC55MR to a compatible receiver.

Step 1:

Press [SRC] and select [STANDBY] by using the [Control]

knob and then Press [Control] to enter function setting mode.

Step 2:

Select [Initial Settings] then [Remote

Settings] then [Remote ID Set] using the [Control] knob.

A remote control ID list is displayed. "Yes" indicates that this ID is
already registered. "No" indicates that this ID is available.

Step 3:

Press [Control] knob on desired ID.

"Registering…” appears.

Registering…

Summary of Contents for KCA-RC55MR

Page 1: ...CA RC55MR REMOTE CONTROL UNIT INSTRUCTION MANUAL UNITE DE TELECOMMANDE MODE D EMPLOI UNIDADE DE CONTROLO REMOTO MANUAL DE INSTRUC0ES JVC KENWOOD Corporation US Residents Only 2012 JVC KENWOOD Corporation ...

Page 4: ...ob and then Press Control to enter function setting mode Step 2 Select Initial Settings then Remote Settings then Remote ID Set using the Control knob A remote control ID list is displayed Yes indicates that this ID is already registered No indicates that this ID is available Step 3 Press Control knob on desired ID Registering appears Registering ...

Page 5: ... ID2 DISP Registers ID3 ID Set Completed appears on the receiver when corresponding button on remote has been pressed You MUST exit out of the menu and repeat the above steps in between programming each remote You may register up to 3 remotes Step 5 Exiting from the Function setting mode Press and hold the back button on the receiver ...