19
6. Add detergent into the detergent drawer. The quantity of detergent will depend on the amount of
laundry, the degree of soiling and the water hardness. Use the amount of detergent suggested
on the packaging.
7. Press the
Start/Pause
button to start the washing.
8. The machine will sound when the programme is complete.
removing washing (once programme is finished)
• Open the machine door and remove your washing.
• Remove any foreign objects to avoid risk of rusting.
• Leave the door and detergent drawer open so that residual water can evaporate.
If the door is locked and you switched the machine off and then on - or if there’s a power
cut - it will stay locked for 5 seconds.
Door remains locked for 1 minute after wash stopped.
delay start the programme
1. Select a wash programme.
2. Press the
Delay
button repeatedly to set the delay hours for the programme to start (0-24 hr).
3. Press the
Start/Pause
button to confirm and commence the delay function.
To cancel the delay function:
• before the programme starts, press the
Delay
button repeatedly until 0 hr
• while the programme is running, press the
On/Off
button to Off.
adding laundry during wash
You can still add laundry into the unit while it is running a programme. Make sure to follow the
procedures below in order to avoid being scalded by the hot water in the drum.
1. Press the
Start/Pause
button for 3 seconds.
2. Wait until the drum stops rotating.
3. Wait until the door is unlocked.
4. Open the door carefully, be alert of the hot water in the drum.
5. Add the laundry carefully into the drum and close the door.
6. Press the
Start/Pause
button to resume the programme.
The machine may not unlock the door for adding laundry when there is too much water or
when the temperature is too high in the drum.
K10W7D18_IB_180412_grace.indd 19
12/4/18 4:01 pm
