Kenwood K-521 Instruction Manual Download Page 68

Page: 68 / 76

K-521

Messages

Displayed Message

Meaning

NO DISC

There is no CD inserted.

Insert a CD.

NO PGM

No tracks are programmed.

Program the tracks you want to listen to. (See P.31)

Cancel program mode and use normal playback. (See P.32)

PGM FULL

An attempt was made to program a 51st CD track.

You can program only up to 50 tracks. (See P.32)

NOT SUPPORT

An iPod that is not supported with this device is connected. (See P.38)

NonPCM

The

[

IGITAL IN (OPTI

AL)]

terminal on the rear panel of the main unit is

receiving non-PCM input signals. (See P.13)

TRAY OPEN

The CD tray is open.

Close the tray.

UNLOCK

The component connected to the

[

IGITAL IN (OPTI

AL)]

terminal on the

rear panel of the main unit is not turned on. Alternatively, there is no signal
input.

––– kHz

The sampling frequency of the input PCM signals is outside the playable
range.

. . . . . . . . . . . .

There is no TAG information. (See P.23)

K-521E̲B60-5813-08̲01̲GVT0294-002A.indb 68

09.10.26 4:32:02 PM

Summary of Contents for K-521













































































Search results

Summary of Contents for K-521

Reviews:

Related manuals for K-521

Brands by name

Popular brands

Kenwood K-521, Instruction Manual

Search results

Summary of Contents for K-521

Reviews:

Related manuals for K-521

Brands by name

Popular brands