Quick Connect Guide Step 2: DVD Player
HTB-504DV
(Speaker Quick-Connect Guide on other side)
If you have any questions about your new system, please contact our Customer Service Department at (800) KENWOOD, or visit our Web site at www.kenwoodusa.com
Connecting the DVD Player to the
Receiver
Connect the DVD player to the receiver as shown in the main
diagram, using the supplied cables. You can plug the DVD player’s
power cord into one of the receiver’s switched AC outlets.
Coaxial Digital Cable
The coaxial digital cable (orange) carries the digital audio bit-
stream to the receiver for decoding.
Audio and Composite Video Cables
The audio and composite video cables carry the standard analog
audio and composite video signals to the receiver. Use the red
wire for the right audio channel, the white wire for the left audio
channel and the yellow wire for the video connection.
S-Video Connections
If your TV or monitor has an S-Video input you can use an
optional S-Video cable to connect the DVD player to the receiver
for improved video quality over the standard composite video
connection. If you use an S-Video cable to connect the DVD play-
er to the receiver you must also use an S-Video cable to connect
the receiver to the TV or monitor.
Programming the Receiver Remote to
Control the DVD Player
Before you can use the receiver’s remote to control the DVD play-
er, you need to program the remote.
1. Press the DVD
SOURCE
button on the receiver’s remote.
2. Press and hold the
SETUP
button until the remote’s LED blinks
twice, then release the
SETUP
button.
3. Using the remote’s numeric buttons, enter the code “0-5-3-4”.
The remote’s LED will blink twice. (If the LED does not blink
twice, repeat this step.)
4. Turn the DVD player’s power on and press its button to open the
disc drawer. Aim the receiver’s remote at the DVD player and press
the
>/ll
button. The disc drawer should close. The receiver remote
will now control the DVD player. (If the DVD player’s disc drawer
does not close, repeat Steps 1 – 3.)
Controlling the DVD Player with the Receiver
Remote
To operate the DVD player with the receiver’s remote, press the DVD
SOURCE
button, then press the button for the operation you want to
perform. If you don’t press a button within 15 seconds, the remote
automatically returns to the receiver control mode, and you must press
the DVD
SOURCE
button again before operating the DVD player.
Use the following buttons on the receiver’s remote to control the DVD
player:
See the receiver’s instruction manual for more information about con-
trolling the DVD player with the receiver’s remote.
Connecting Other Components
To connect your TV and other components to the receiver, refer to
pages 10 – 15 of the receiver’s instruction manual.
1.
2.
3.
4.
Power ON/OFF
Numeric entry
buttons
Return to previous
menu screen
Cursor and selection
controls
DVD Controls:
>> = Search Forward
<< = Search Backward
>/ll = Play
ll = Pause
= Stop
Activates the
on-screen display
Activates the
menu system
DVD Source
button
