Controlling the DVD Player with the Receiver
Remote
Use the following buttons on the receiver remote to control the DVD
player:
Quick Connect Guide Step 2: DVD Player
HTB-403DV
Connecting the DVD Player to the
Receiver
Connect the DVD player to the receiver as shown in the main
diagram, using the supplied cables. You can plug the DVD player’s
power cord into one of the receiver’s switched AC outlets.
Optical Digital Cable
The optical digital cable carries the digital audio bitstream to the
receiver for decoding. Remove the caps from the optical digital
jacks on the receiver and DVD player and store them for future
use. Insert the optical cable’s connectors all the way into the jacks
until they ‘click’ into place. Do not allow the optical cable to
become kinked or bent.
Audio/Video Cable
The audio/video cable carries the standard analog audio and
composite video signals to the receiver. Use the red and white
wires for the audio connections and the yellow wire for the video
connection.
Connecting Other Components
To connect your TV and other components to the receiver, refer to
pages 8 - 9 of the receiver’s instruction manual.
Programming the Receiver Remote to
Control the DVD Player
Before you can
use the receiver’s
remote to control
the DVD player,
you need to pro-
gram the remote.
1. While holding
the remote’s
POWER
button
down, use the
number buttons
to enter code
number “1”.
2. To operate the
DVD player
with the receiv-
er’s remote,
press the
DVD
POWER
button,
then press the
button for the
operation you
want to per-
form.
If you don’t
press a button
for more than
10 seconds, the
remote auto-
matically
returns to the
receiver control
mode, and you must press the DVD
POWER
button again before
operating the DVD player.
1
1.
2.
Cursor
up
Cursor
down
Cursor
right
Cursor
left
Search
forward
Search
backward
Enter
Play
Stop
Pause
Activates
the DVD
menu
Activates
the on-
screen
banner
display
Turns
the on-
screen
banner
display
off