before using your Kenwood
appliance
●
Read these instructions carefully and
retain for future reference.
●
Remove all packaging and any
labels.
safety
●
Ensure the cord is fully unwound
before using the mixer.
●
Never put the mixer body in water or
let the cord or plug get wet.
●
Never leave the mixer on
unattended.
●
Never operate the mixer in the raised
position.
●
Never exceed the maximum
capacities.
●
Keep fingers, hair, clothing and
utensils away from moving parts.
●
Never let the cord touch hot
surfaces or hang down where a
child could grab it.
●
Never use a damaged mixer. Get it
checked or repaired: see 'service
and customer care'.
●
Never use an unauthorised
attachment.
●
Always unplug the appliance when
not in use, before fitting or removing
parts or before cleaning.
●
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
●
Children should be supervised to
ensure that they do not play with the
appliance.
●
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your mixer.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using your mixer for
the first time
●
Wash the parts (see 'cleaning').
key
eject button
5 speed control
mixer body
mixer cradle
release/locking button
mixer stand
mixing bowl
beaters
kneaders (if supplied)
to use your mixer
1 Attach the mixer to the stand by
placing the mixer on top of the
cradle and pushing down to locate.
.
●
To remove the mixer, steady the
cradle with one hand whilst lifting the
mixer free with the other.
2 Push in the release/locking button
and swing the mixer upwards on the
stand
.
3 Insert the beaters or kneaders into
the mixer ensuring that they are
fitted to the correct outlet. The
beater fitted with the plastic drive
button must fit into the outlet marked
with the corresponding dot
.
Likewise the kneader with the larger
metal disc must also be inserted into
this outlet.
●
The beaters or kneaders can only be
fitted or removed when the speed
control is in the off (0) position.
English
2