Kenwood HM-381MD Instruction Manual Download

Page: 73 / 76

HM-381MD (En)

Knowledge section

Remedy

Cause

Symptom

CD player section

Place the disc properly, with the label
side facing upward.

Place the disc properly.

Clean the disc referring to

“Disc han-

dling precautions”

Try another disc.

Refer to

“Caution on condensation”

and

remove the condensation by evaporation.

Place a disc in the CD player.

Press the

key.

Clean the disc referring to

“Disc han-

dling precautions”

Try another disc.

Clean the disc referring to

“Disc han-

dling precautions”

Try another disc.

Install the unit in a place not subject to
vibrations.

A CD is placed in the player but
it cannot be played.

Sound is not produced.

Sound skips.

The disc is placed upside down.

The disc position is displaced.

The disc is extremely dirty.

The disc is scratched.

Dew is condensed on the optics lens.

The disc has not been placed.

The player is not put to the play mode.

The disc is extremely dirty.

The disc is scratched.

The disc is dirty.

The disc is scratched.

The player is subject to vibration.

Remote control unit

Symptom

Cause

Remedy

Remote control operation is
not possible.

Batteries are exhausted.

The remote control is too far away from
the system, the controlling angle is devi-
ated or there is an obstacle in between.

The component to be played is not loaded
with a CD, MD or cassette tape.

Replace with new batteries.

Operate the unit inside the remote con-
trollable range.

Load a CD, MD or cassette tape in the
component to be played.

In case of difficulty

Summary of Contents for HM-381MD













































































Search results

Summary of Contents for HM-381MD

Reviews:

Related manuals for HM-381MD

Brands by name

Popular brands

Kenwood HM-381MD, Instruction Manual

Search results

Summary of Contents for HM-381MD

Reviews:

Related manuals for HM-381MD

Brands by name

Popular brands