Kenwood HD20GA7 Instruction Manual Download Page 36

Page: 36 / 85

PLAYER

Application section

Modification/check of setups

The [SETUP] view can be used to modify the setups of the player, including the playback mode and beep tone, as

desired as well as to check their current setups.

With the Home view displayed, press the multi-control (Up/Down) button to select [SETUP],

and press the multi-control (Center) button.

Press the multi-control (Up/Down) button to select the setup item to be changed or checked, and

press the multi-control (Center) button.

The [

SETUP

] view appears.

The list of options for the selected setup item is

displayed so that you can select the desired option.

Press the multi-control (Up/Down) button to select an option, and press the multi-control (Center)

button.

The [

] mark is displayed on the left of the selected

option to indicate the new setup. The [

SETUP

] view

reappears when the multi-control (Center) button is

pressed.

✍

[

Types of setup items

]

‡

Summary of Contents for HD20GA7






















































































Search results

Summary of Contents for HD20GA7

Reviews:

Related manuals for HD20GA7

Brands by name

Popular brands

Kenwood HD20GA7, Instruction Manual

Search results

Summary of Contents for HD20GA7

Reviews:

Related manuals for HD20GA7

Brands by name

Popular brands