X92-4470-0x
Clamper chassis assy
Disc
Roller lever assy
Roller arm
Slider (R) assy
OPERATION DESCRIPTION
7
3) Activating slider (R)
When the carrier gear rotates, its wall (section C) pushes
and moves the trigger slider.
When the trigger slider is moved, slider (R) is pulled by the
force of spring (section D).
When the trigger slider moves along the longitudinal grooves
on slider (R) till the ends of grooves, the trigger slider itself
begins to push and move slider (R).
[3] Flow Until Disc Chucking (Playback Standby
Condition)
(1) Functions activated by slider (R)
1) Operation modes
To play back a CD, it is required to perform a flow of opera-
tions as shown below.
2) Coupling conditions
The parts used for performing the above functions are
coupled with slider (R) as shown below.
• Pulling the disc in and stopping the roller rotations after it.
• Moving the clamper downwards so that it can clamp the disc
during playback. (Disc chucking)
• Moving the rollers that are in contact with the disc.
(Lowering the roller lever)
• Float (suspend) the mechanism in order to protect it from
vehicle vibrations during disc playback.
• Moving the pickup (optical ass'y) so that it can reads the
disc signals.
These series of operations are activated by the movement of
slider (R).
Start point
Ends of longitudinal
grooves
Sections
pushing slider (R)
Right side view
Slider (R)
Slider (R)
