DV-K751/S701
3
CAUTIONS
Operation to reset
The microprocessor may fall into malfunction (impossibility to operate
erroneous display, etc.) when the power cord is unplugged while power
is ON or due to an external factor. In this case, execute the following
procedure to reset the microprocessor and return it to normal condi-
tion.
÷
Please note that resetting the microprocessor clears the contents
stored in, it returns the microprocessor to the condition when it left
the factory.
Perform the following operation.
1
Press the POWER key to the ON position.
2
Press the ON/STANDBY (
) key to ON.
3
Wait for a few seconds to ensure that the display shows “NO
DISC”.
4
While holding the
7
key, press and hold the ON/STANDBY
(
) key until “INITIAL OK!” appears.
N O D I S C
Note related to transportation and move-
ment
Before transporting or moving this unit, be sure to remove any
disc from it and carry out the following operation.
1. Press the POWER key to the ON position.
2. Press the ON/STANDBY (
) key to ON.
3. Wait a few seconds and verify that the display shown appears.
4. Set the POWER key to OFF.
Operation to reset
The microprocessor may fall into malfunction (impossibility to operate
erroneous display, etc.) when the power cord is unplugged while power
is ON or due to an external factor. In this case, execute the following
procedure to reset the microprocessor and return it to normal condi-
tion.
÷
Please note that resetting the microprocessor clears the contents
stored in, it returns the microprocessor to the condition when it left
the factory.
Perform the following operation.
1
Press the MAIN POWER key to the ON position.
2
Press the REMOTE POWER key to ON.
3
Wait for a few seconds to ensure that the display shows “NO
DISC”.
4
While holding the
7
key, press and hold the REMOTE POWER key
until “INITIAL OK!” appears.
N O D I S C
Note related to transportation and move-
ment
Before transporting or moving this unit, be sure to remove any
disc from it and carry out the following operation.
1. Press the MAIN POWER key to the ON position.
2. Press the REMOTE POWER key to ON.
3. Wait a few seconds and verify that the display shown appears.
4. Set the MAIN POWER key to OFF.
WITH ON/STANDBY KEY
WITH REMOTE POWER KEY
DV-K751(K)
COVER1,1(
98.12.12
15:04
y [ W 6
