32
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Installing in Toyota cars
Install onto the car brackets using the supplied screws (E) or (F). Use the
mounting holes (
) or (
) that fit the car brackets. Then, install the
supplied trim plate (C).
Do the required wiring.
(Page 33)
Dashboard of your car
Car bracket*
* Only for illustration purpose.
Installation/Connection
Installing the unit (without mounting sleeve)
1
Remove the mounting sleeve and trim plate from the unit before
installing.
2
Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with supplied screws.
Use only the specified screws. Using wrong screws might damage the
unit.
Removing the unit
1
Fit the catch pin on the extraction keys into the holes on both sides of
the trim plate, then pull it out.
2
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
DPX795BH_K_B5A-3898-00_EN_1st Draft.indd 32
DPX795BH_K_B5A-3898-00_EN_1st Draft.indd 32
8/6/2021 3:27:53 PM
8/6/2021 3:27:53 PM
