background image

English

   

|

   

27

Audio Control

[AUD] button

Selects the Audio item to be adjusted.

[VOL] buttons

Adjusts the Audio item.

•  Refer to <Audio Control> (page 7) for the operation 

method, such as the procedures for Audio control and 
others operations.

•  The remote control can only select and adjust the Basic 

Audio item. Selecting and adjusting of the Detail Audio 
item cannot be done. 

In Tuner source

[FM]/ [AM] buttons

Selects the band.
Each time you press the [FM] button, the band 
alternates between the FM1, FM2, and FM3 bands.

[

4

]/ [

¢

] buttons

Tune up or down band.

[0] — [9] buttons

Press buttons [1] — [6] to recall preset stations.

[DIRECT] button

Enters and cancels the <Direct Access Tuning> 
(page 12) mode.

In Disc/USB source

[

4

]/ [

¢

] buttons

Going forwards and backwards between music.

[

+

]/ [

] buttons

Going forwards and backwards between disc/
folders.

[

38

] button

Each time you press the button, the music is played 
or  paused.

[0] — [9] buttons

When in <Direct Music Search> (page 16) and 
<Direct Disc Search> (page 16), enters the music/
disc number.

In TV source

[FM] button

Selects the TV band and Video input.
Each time you press the [FM] button, TV bands and 
Video input alternates.

[

4

]/ [

¢

] buttons

Selects the TV channel.

[0] — [9] buttons

Press buttons [1] — [6] to recall preset TV channels.

[DIRECT] button

Enters and cancels the <Direct TV Tuning> (page 
13) mode.

Dual Zone System

[2-ZONE] button

Each time you press the button, "2ZON" of <Audio 
Setup> (page 8) is turned ON or OFF.

[

5

]/ [

] buttons

Adjusts the volume of the rear channel.
The rear channel activates while the Dual Zone 
System is ON.

B64-3828-00̲00̲English.Indd   27

B64-3828-00̲00̲English.Indd   27

07.4.24   6:40:56 PM

07.4.24   6:40:56 PM

Summary of Contents for DPX-MP5100U



































Reviews: