19
DPX304/DPX308U/DPX404U
DPX-MP3120/U5120/U5120S
TEST MODE
Procedure in compressed media
Key
Description of display
Description
File type display
(MP3)
M
P
3
The
fi
le format is displayed just before the
fi
le play-
back.
File type display
(WMA)
W
M
A
File type display
(AAC)
A
A
C
●
Audio adjustment
The operation speci
fi
cation and adjustment items in the test mode are the same as those in the product speci
fi
cation.
*
However, the layer position and setting value in respective adjustment items shall be changed as follows.
Press [
]/[
] key to adjust Bass-Bass Center Level to 3 stepss (-8
↔
0
↔
+8) (Initial value: 0).
Press [
]/[
] key to adjust Middle-Middle Center Level to 3 steps (-8
↔
0
↔
+8) (Initial value: 0).
Press [
]/[
] key to adjust Treble-Treble Center Level to 3 steps (-8
↔
0
↔
+8) (Initial value: 0).
Press [
]/[
] key to adjust Fader to 3 steps (R15
↔
0
↔
F15) (Initial value: 0).
Press [
]/[
] key to adjust Balance to 3 steps (L15
↔
0
↔
R15) (Initial value: 0).
Press [
]/[
] key to adjust Sub Woofer Level to 3 steps (-15
↔
0
↔
+15) (Initial value: 0).
Press [
]/[
] key to adjust Detailed-LPF SW to 2 steps (85kHz
↔
Through) (Initial value: Through).
Press [
]/[
] key to adjust Volume Offset (except for the internal AUX) to 2 steps (-8
↔
0) (Initial value: 0).
Press [
]/[
] key to adjust Volume Offset (internal AUX) to 3 steps (-8
↔
0
↔
+8) (Initial value: 0).
●
Backup current measurement
Procedure
Note
Power on during ACC OFF (Back Up ON)
The MUTE terminal is turned OFF not in 15 seconds but in 2 seconds.
(When the terminal is turned OFF, the CD mechanism does not function.)
3. Forced Power ON mode function
●
How to transfer to the mode
In the set for E destination, even if security is allowed, Power ON can be maintained for 30 minutes only by resetting while
pressing and holding [ENTER] key and [PRESET-4] key. After 30 minutes have elapsed, the set can be recovered only by reset-
ting it.
