32
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Part list for installation
(A) Mounting sleeve ( ×1 )
(B) Trim plate ( ×1 )
(C) Wiring harness ( ×1 )
(D) Extraction key ( ×2 )
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
terminal of the car battery.
2
Install the DAB antenna.
See “Installing the DAB antenna” on page 35.
3
Connect the wires properly.
See “Wiring connection” on page 34.
4
Install the unit to your car.
See the following “Installing the unit (in-dash mounting)”.
5
Connect the terminal of the car battery.
6
Press
B
SRC to turn on the power.
7
Reset the unit. (Page 4)
Installation/Connection
1
Remove the mounting sleeve and trim plate from the unit before
installing.
2
Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with screws (commercially available).
Use only the specified screws. Using wrong screws might damage the
unit.
Installing the unit (in-dash mounting)
Do the required wiring.
(Page 34)
Dashboard of your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
Installing the unit (without mounting sleeve)
JS_KWD_DPX_7200DAB_EN_EN00.indd 32
JS_KWD_DPX_7200DAB_EN_EN00.indd 32
10/22/2019 11:29:27 AM
10/22/2019 11:29:27 AM
