D40-1132-05
4
DISASSEMBLY FOR REPAIR
1.3.
\
CASSETTE CASE/
]
CASE LIFTER
Disassembling
(a) Set the mechanism in EJECT POSITION.
(b) Remove
D
2x3 CAMERA SCREW.
(c) Push
]
CASE LIFTER in arrow direction so that "E" and
"F" portions are disengaged.
Reassembling
(a) Confirm that the mechanism is at EJECT position.
(b) Meeting the holes in
]
CASE LIFTER with the holes in
\
CASSETTE CASE as shown in figure, assemble these
parts.
(c) Meeting A, B, C with A', B', C' respectively, insert the
Cassette Case obliquely. (Note that "D" portion may get
stuck.)
(d) When the Cassette Case becomes horizontal, confirm that A, B, C are engaged, then adjust fitting at E and F portions in
Fig.(c) in previous item, and insert the Case completely. (Step (c) in previous item) (Fitting is over when no gap is found.)
(e) Tighten 2x3 SCREW.
Summary of Contents for DPX-5010
Page 36: ...DPX 5010 43 ...
Page 60: ......
