Kenwood DPF-J7020, Instruction Manual

Page: 18 / 32

18
DPF-J7020 (EN)
Programming tracks in desired order (PGM mode)
G P E R E P T A O 2 D N 0 T 3
G P E R E P T A O 2 D N 0 T 3
Preparation
÷
Load discs in the carousel.
0
Repeated playback
(REPEAT mode)
To repeat only the desired tracks
1
Program the desired tracks by performing steps
1
to
3
of “Programming tracks in desired order”.
^
÷
Up to 32 tracks can be programmed by repeating steps
1
.
2
Switch REPEAT ON.
3
Start playback.
÷
The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
÷
All of the programmed tracks will be repeated.
÷
In case only one track is programmed, only that track will be repeated.
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
→
OFF)
To repeat one selected disc
3
Start playback.
Previous disc Next disc
Within 8 seconds!
2
Select the disc number.
4
Switch REPEAT ON.
÷
The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
For random repetition (
For music type or user file repetition
∞
For best selection repetition
•
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
→
OFF)
÷
The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
1
Check that the unit is in the normal play TRACK
mode.
#
E
REPEAT
ENTER
6
DOWN UP
DISC SKIP
ENTER
6
E
REPEAT