Kenwood DPF-1010 Instruction Manual Download Page 16

Page: 16 / 24

DPF-3010/2010/1010 (En)

Repeated playback

To repeat only the programmed tracks

: Keys and control used in the operations described on this page.

™

Preparation

To cancel repeated playback

Press the REPEAT key again.

Lights up.

Press so that the "PGM" indicator lights.

Select the desired track No.

Press the numeric keys as shown below...
To enter track No. 25:

005

Switch REPEAT ON.

Start playback.

Repeat steps

and

above.

Go to step

within 5 seconds.

Set the entry.

All of the programmed tracks will be repeated.

In case only one track is programmed, only that track will be repeated.

Up to 20 tracks can be programmed. When

“

FULL

”

is displayed, no

more tracks can be programmed.

Lights up.

Goes off.

Do this operation in the stop mode.

P.MODE

REPEAT

PLAY/PAUSE

REPEAT

TRACK

NO.

PGM

0 1

TRACK

NO.

PGM

REPEAT

0 1

TRACK

NO.

PGM

REPEAT

0 1

The figure shows an example for the DPF-3010

Load a disc in the CD player.

Summary of Contents for DPF-1010

























Search results

Summary of Contents for DPF-1010

Reviews:

Brands by name

Popular brands

Kenwood DPF-1010, Instruction Manual

Search results

Summary of Contents for DPF-1010

Reviews:

Brands by name

Popular brands