Viewing Previous Routes and
Destinations
Before you can use this feature, you must
enable the travel history feature (
).
You can view your previous routes and
places you have stopped on the map.
Select
Apps
>
Where I've Been
.
Traffic
NOTICE
Garmin and JVC KENWOOD are not
responsible for the accuracy or timeliness of
traffic information. Traffic information may
not be available in all areas or countries.
Using the built-in receiver, the navigation
system can receive and use traffic
information. When a traffic message is
received, you can see the event on the map
and change your route to avoid the traffic
incident. Traffic information is not available
on all models.
Traffic Subscription Activation
You can purchase traffic subscriptions for
for more information.
FM TMC Traffic
FM Traffic Message Channel (TMC) traffic
receivers receive traffic information
broadcast over the FM Radio Data System.
The FM TMC subscription activates
automatically after your navigation system
acquires satellite signals while receiving
traffic signals from the service provider. You
can add other FM TMC subscriptions at any
time.
NOTE:
The availability of FM TMC depends
on your region and may require the
purchase of a subscription.
For information about traffic receivers and
coverage areas, go to
.
About the Traffic Icon
When you are receiving traffic information, a
traffic icon appears on the map. The traffic
icon changes color to indicate the severity of
traffic conditions.
Green
: Traffic is flowing freely.
Yellow
: Traffic is moving, but there is a
delay. There is moderate traffic
congestion.
Red
: Traffic is not moving or moving very
slowly. There is a severe delay.
Gray
: Traffic information is not available.
Traffic on Your Route
Viewing Traffic on Your Route
1
While navigating a route, select .
2
Select
Traffic On Route
.
A list of traffic events appears, organized
by their location on the route.
3
Select an event.
Manually Avoiding Traffic on Your
Route
1
From the map, select .
2
Select
Traffic On Route
.
3
If necessary, use the arrows to view other
traffic delays on your route.
4
Select >
Avoid
.
Taking an Alternate Route
1
While navigating an automobile route,
select .
2
Select
Alternate Route
.
3
Select a route.
Viewing Traffic on the Map
The traffic map shows color-coded traffic
flow and delays on nearby roads.
1
From the map, select .
2
Select
Traffic Conditions
.
Traffic in Your Area
Searching for Traffic Delays
1
From the map page, select .
2
Select
Traffic Conditions
> .
3
Select an item in the list.
4
If there is more than one delay, use the
arrows to view additional delays.
10
Traffic
Summary of Contents for DNX8160X
Page 21: ......