Kenwood DNX8160DABS, Instruction Manual

Page: 73 / 117

Setting Up
72 72
System Setup
NOTE
• Each operation in this section can be started from
the multi function menu.
1
Press the <MENU> button.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
See the following section for each setting.
• Set up the user interface (P.72)
• Set up special (P.75)
•
Set up security (P.76)
• Set up display (P.77)
• Set up camera (P.79)
• Set up navigation (P.80)
• Set up AV (P.81)
User Interface Setup
You can setup user interface parameters.
1
Press the <MENU> button.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [User Interface].
User Interface screen appears.
4
Set each item as follows.
Steering Remote Controller
Sets the desired function in the steering remote
controller. See
Learning function of steering
remote (P.74)
.
Beep
Turns the key touch tone on or off.
Default is “ON”.