Kenwood DNX573S, Quick Start Manual

Page: 183 / 190

Map Detail : Sets the level of detail on the
map. More detail may cause the map to
draw slower.
Map Theme : Changes the color of the map
data.
Map Buttons : Sets which icons are included
on the map. Up to three icons can be
included on the map.
Map Layers : Sets the data that appears on
the map page ( Customizing the Map
Layers ).
Dashboards : Sets the map dashboard
layout.
Auto Zoom : Automatically selects the zoom
level for optimal use of your map. When
disabled, you must zoom in or out
manually.
Audible Speed Alerts : Alerts you when
your vehicle is exceeding the speed limit.
NOTE: This feature is not available in all
areas.
myMaps : Sets which installed maps the
device uses.
Enabling Maps
You can enable map products installed on
your device.
1
Select Settings > Map & Vehicle >
myMaps .
2
Select a map.
Navigation Settings
To open the Navigation settings page, from
the main menu, select Settings >
Navigation .
Calculation Mode : Sets the route
calculation method.
Avoidances : Sets road features to avoid on
a route.
Custom Avoidances : Allows you to avoid
specific roads or areas.
Advanced Detours : Sets the length of the
detour.
Safe Mode : Disables all functions that
require significant operator attention and
could become a distraction while driving.
Voice Prompts : Enables voice prompts.
GPS Simulator : Stops the device from
receiving a GPS signal.
Changing the Route Calculation
Mode
1
Select Settings > Navigation >
Calculation Mode .
2
Select an option:
• Select
Faster Time to calculate routes
that are faster to drive but can be
longer in distance.
• Select Shorter Distance to calculate
routes that are shorter in distance but
can take more time to drive.
• Select Less Fuel to calculate routes
that are more fuel-efficient.
3
Select Save .
Display Settings
Select Settings > Display .
Color Mode : Allows the device to display
day or night colors.
Changing the Color Mode
1
Select Settings > Display > Color
Mode .
2
Select an option:
• To use a light background, select
Day .
• To use a dark background, select
Night .
• To allow the device to display day or
night colors automatically, based on
the time of day, select Auto .
Traffic Settings
From the main menu, select Settings >
Traffic .
Traffic : Enables traffic.
trafficTrends™ : Enables the trafficTrends ™
feature ( trafficTrends ).
Traffic Voice Prompts : Enables voice
prompts for traffic events.
trafficTrends
When the trafficTrends feature is enabled,
your device uses historic traffic data to
calculate more-efficient routes.
NOTE: Different routes may be calculated
based on traffic trends for the day of the
week or the time of day.
12 Customizing the Device