Kenwood DNX4310DAB Instruction Manual Download Page 43

Page: 43 / 55

Return to the Top page

Audio Setting Up

Return to the Top page

Audio Setting Up

Controlling General Audio

Touch [Audio Control].

Set each item as follows.

Fader #/Balance #

Adjust the volume balance around the
touched area.
[

] and [

] adjust the right and left volume

balance.
[

] and [

∞

] adjust the front and rear volume

balance.

Volume Offset*

Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.

Subwoofer Level

Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to “None”.
See

Speaker setup (P.82)

Loudness

Turns the loudness control function on or
off. If turned on, high and low tones are
automatically enhanced during low volume.
Settable only when zone function

(P.86)

set to off.

* If you have increased the volume first, then

reduced the volume using the “Volume
Offset”, the sound generated if you
suddenly switch to another source may be
extremely loud.

Equalizer Control

You can adjust equalizer by selecting the
optimized setting for each category.

Touch [Equalizer].

Equalizer screen appears.

operation

Controlling EQ curves

Select EQ curve from [Natural],
[Rock], [Pops], [Easy], [Top40], [Jazz],
and [User] using [

] and [

Controlling SystemQ-Ex

Selects items to be adjusted for tone curve
setup. If you turn off this setting, only Level
can be set up for tone curves.

Touch [ON] or [OFF] of [SystemQ-Ex].

Controlling equalizer manually

Touch [Tone] in the Equalizer screen.

Set each item as follows.

FREQ

Adjusts the center frequency for each range.
Setting values are as follows.

Bass:

40Hz/50Hz/60Hz/70Hz/80Hz/100Hz/120

Hz/150Hz (Default is “100Hz”.)

Middle:

500Hz/1kHz/1.5kHz/2kHz (Default is

“1kHz”.)

Treble:

10kHz/12.5kHz/15kHz/17.5kHz (Default

is “12.5kHz”.)

LEVEL

Adjusts the level of each range.
Each setting value is within -8dB and 8dB and
default is “0dB”.

Q Factor

Adjust Q value for bass and middle.
Setting values are as follows.

Bass:

1/1.25/1.5/2 (Default is “1”.)

Middle:

1/2 (Default is “1”.)

Bass DC EXT

Turns Bass DC EXT on or off. Default is “OFF”.
If you select “ON”, the bass center frequency is
extended to the low register by approximately
20%.

[Flat]

Tone level becomes 0 (flat).

Subwoofer Level

Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to “OFF”.
See

Speaker setup (P.82)

Summary of Contents for DNX4310DAB
























































Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands

Kenwood DNX4310DAB, Instruction Manual

Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands