Kenwood DNX4310DAB Instruction Manual Download Page 39

Page: 39 / 55

Return to the Top page

Setting Up

Return to the Top page

Setting Up

Display Setup

Touch [Menu] on any screen.

Touch [SETUP].

SETUP Menu screen appears.

Touch [Display].

Display Menu screen appears.
See the following section for each setting.

•

Adjust panel color

(P.76)

•

Changing background image

(P.78)

Panel color coordinate

You can set the screen and button
illumination color.
The selectable items differ depending on the
unit.

Touch [Color] in the Display Menu
screen.

Color screen appears.

Touch [SET] of
[Panel Color Coordinate].

Panel Color Coordinate screen appears.

NOTE

• You can touch [SET] or [Initialize] when

[Panel Color Scan] is set to off.

• Touch [Initialize] to reset the settings to the

default settings.

Touch the desired color.

Registering original color

You can register your original color.

Touch [Adjust] in the Panel Color
Coordinate screen.

Panel Color RGB Coordinate screen
appears.

Use [

] and [

] to adjust each color

value.

Touch the desired preset key for 2
seconds.

Panel color scan

You can set the panel color to continuously
scan through the color spectrum.

Touch [ON] of [Panel Color Scan] in
the Color screen.

Panel Color Scan is set to on.

Summary of Contents for DNX4310DAB
























































Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands

Kenwood DNX4310DAB, Instruction Manual

Search results

Summary of Contents for DNX4310DAB

Reviews:

Related manuals for DNX4310DAB

Brands by name

Popular brands