Kenwood DNX4230TR, Quick Start Manual

Page: 26 / 32

26
Quick Start Guide
Connecting wires to terminals
Pin Numbers for
ISO Connectors
Cable Color Functions
External Power
Connector
A-4 Yellow Battery
A-5 Blue/White Power Control
A-6 Orange/White Dimmer
A-7 Red Ignition (ACC)
A-8 Black Earth (Ground)
Connection
Speaker Connector
B-1 Purple Rear Right (+)
B-2 Purple/Black Rear Right (–)
B-3 Gray Front Right (+)
B-4 Gray/Black Front Right (–)
B-5 White Front Left (+)
B-6 White/Black Front Left (–)
B-7 Green Rear Left (+)
B-8 Green/Black Rear Left (–)
*Speaker Impedance: 4-8 Ω
Fuse (10A)
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
P.CONT
ANT.
CONT
MUTE
REMOTE CONT
REMOTE INPUT
STEERING WHEEL
Accessory
1
A B C
C: Red
(Ignition wire)
A: Black
(Ground wire)
B: Yellow
(Battery wire)
Connect either to the power control
terminal when using the optional
power amplifier, or to the power
terminal for the booster amplifier
of the film-type or short pole type
antenna.
If no connections are made, do not let the
wire come out from the tab.
Connect to the terminal that is
grounded when either the telephone
rings or during conversation.
To use the steering wheel remote
control feature, an exclusive remote
adapter (not supplied) that matches
your car is required.
Blue/White (Power
control/ Antenna
control wire)
Brown (Mute
control wire)
Light Blue/Yellow
(Steering remote
control wire)
2
WARNING for Connecting the ISO Conncetor
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make
sure to make the proper connections to prevent damage to the unit. The default connection
for the wiring harness is described in (1) below. If the ISO connector pins are set as described
in (2), make the connection as illustrated. Please be sure to reconnect the cable as shown (2)
below to install this unit to the Volkswagen vehicles etc.
(2)
The red (A-7 pin) of the vehicle’s ISO
connector is connected to the constant
power supply, and the yellow (A-4 pin) is
linked to the ignition.
(1): Default setting
The red (A-7 pin) of the vehicle’s ISO
connector is linked with the ignition, and
the yellow (A-4 pin) is connected to the
constant power supply.
Red (Ignition cable)
Unit Vehicle
Yellow (Battery cable) Yellow (A-4 pin)
Red (A-7 pin) Red (Ignition cable)
Unit
Vehicle
Yellow (Battery cable) Yellow (A-4 pin)
Red (A-7 pin)