Kenwood DNX4210DAB, Instruction Manual

Page: 22 / 56

42 42 43
Return to the Top page
CD, Disc, iPod, USB device, SD card
Return to the Top page
CD, Disc, iPod, USB device, SD card
USB/SD setup
NOTE
• The screen shot below is for USB device. However,
the setting items of USB and SD setup are quite
the same.
1
Set each item as follows.
Picture Display Time
Selects length of time to display JPEG picture
file in the screen. Select from [Short], [Middle],
and [Long] (default).
On Screen USB/On Screen SD
Sets how to display the information of the USB
device or SD card.
Auto (Default) : Information appears for 5
seconds when updated.
OFF : Does not display any information.
iPod setup
1
Set each item as follows.
AudioBook Speed
Sets the audio book playback speed. Select
from [Slow], [Normal] (default), and [Fast].
Wide Screen*
Sets Wide Screen. Set [ON] or [OFF] (default).
On Screen iPod
Sets how to display the information of the
iPod.
Auto (Default) : Information appears for 5
seconds when updated.
OFF : Does not display any information.
* This setting is not available when an iPod
is connected.
DivX setup
1
Set each item as follows.
DivX(R) Registration Code
Checks the registration code. This code is
needed when making a disc which has DRM
(Digital Rights Management).
DivX(R) Deactivation
Deregisters the unit which is already registered.
After you touch the key, a confirmation
message appears. Follow the message and
complete the operation.
NOTE
• [DivX(R) Registration Code] is disabled when a
DVD is being played.
• When downloading a DivX VOD file controlled
by DRM, register the code appeared on the
screen. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is
displayed when playing a DivX VOD file with the
viewing restriction. When the remaining number
of viewing reached 0, a warning message appears
and the file cannot be played.