Kenwood DNR3190BTS, Instruction Manual

Page: 87 / 117

Controlling Audio
86
Zone Control
You can select different sources for front and
rear positions in the vehicle.
1
Press the
[
MENU
]
/
[ ]
button.
h h
Popup menu appears.
2
Touch
[
Audio
]
.
h h Audio screen appears.
3
Touch
[
Zone Control
]
.
h h Zone Control screen appears.
4
Touch
[
Zone Select
]
.
5
Touch
[
Dual Zone
]
.
6
Set each source as follows.
■ [
Zone Select
]
Touch
[
Single Zone
]
to turn off the dual
zone function.
■ [[
Front Source
]
,
[
Rear Source
]
Select an audio source for each.
Rear Source;
“AV-IN”/“DISC”/“iPod”/“SD”/“USB”/“OFF”
■ [
Rear VOL.
]
Adjust the rear source volume.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/Bass Boost
(P.87)
– Equalizer Control/Sound Effect/Listening
Position
(P.84, 87, 88)
– Speaker Setup
(P.82)
– High-resolution Sound Source File Playback
• You cannot select AV-IN if the AV-IN input
terminal is used for camera.
• You cannot select iPod if it is connected via
Bluetooth.
• If you select Radio, USB, SD, iPod, DISC (Music CD/
Disc media), Spotify or Bluetooth audio as the
Front Source, you cannot select USB, SD, iPod,
DISC (Music CD/Disc media) as the Rear Source.
• If you select Wireless Mirroring, Apple CarPlay or
Android Auto as the Front Source, you cannot
select DISC (Music CD/Disc media), USB, SD or
iPod as the Rear Source.
Autogoods “130”
130.com.ua