Kenwood DMX5019DAB Instruction Manual Download Page 47

Page: 47 / 60

ENGLISH

Installation and Connection

Parts list for installation

Note:

This parts list does not include all the package

contents.

Wiring harness (× 1)

Extension parking cable, 2 m (× 1)

Trim plate (× 1)

[

Mounting sleeve (× 1)

“

Extraction keys (× 2)

]

Microphone, 3 m (× 1)

Installation procedure

Remove the key from the ignition and
disconnect the

battery.

Make the proper input and output wire
connections for each unit.

Connect the speaker wires of the wiring
harness.

Take Connector A and B on the wiring
harness and connect it to the speaker
connector and external power connector
in your vehicle.

Connect the wiring harness to the unit.

Install the unit in your car.

Make sure that the unit is installed securely in place.
If the unit is unstable, it may malfunction (e.g., the
sound may skip).

Reconnect the

battery.

Configure <Initial SET-UP>. (Page 4)

Installing the unit

Installing the unit using the mounting

sleeve

Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.

Installing the trim plate

00_EN_DMX5019DAB_TC_E.indb 43

28/9/2018 8:44:33 AM

Summary of Contents for DMX5019DAB





























































Search results

Summary of Contents for DMX5019DAB

Reviews:

Brands by name

Popular brands

Kenwood DMX5019DAB, Instruction Manual

Search results

Summary of Contents for DMX5019DAB

Reviews:

Brands by name

Popular brands