Kenwood DM-SE7 Instruction Manual Download Page 50

Page: 50 / 52

DM-SE7(En)

In case of difficulty

Action

Meaning

Displayed Message

An attempt is made to record digital
signal from a source using other sam-
pling frequency than 38kHz, 44.1 kHz,
48 kHz.

The optical fiber cable is unplugged
or loose. (The connector is not con-
nected.)

Use analog recording.

Connect the optical fiber cable cor-
rectly.

UNLOCK

Displayed messages and actions to be taken against them

SCMS ON

An attempt is made to record digital
signal from a source while its digital
copy has been prohibited by SCMS.

Use analog recording.

There is no recordable area on the
disc.

An attempt is made to record a 256th
track.

Use another recordable disc.

More than 255 tracks cannot be
recorded per disc.

DISC FULL

An attempt is made to assign a title
with more characters than usable.

Refer to “Total number of title char-
acters”.

TITLE FULL

The disc does not contain any record-
ings.

When playback is required, use a
recorded disc.

BLANK DISC

The disc can be used for recording
without any problem.

The disc does not contain any tracks
but has a disc title.

NO TRACKS

This is a normal operation.

The

TOC*

data of the disc is being

read.

READING

This is a normal operation.

The data related to editing or record-
ing is being written in the disc.

WRITING

Perform

“QUICK ERASE”

to delete

all titles

“

ALL?”

. If this is not

possible, use another disc.

‚

The contents of

UTOC

are abnor-

mal.

DISC ERROR

Perform editing following the re-
strictions.

An attempt is made to perform editing
beyond the restrictions, for example to
erase a track which is too short.

CAN'T EDIT

Press the

ENTER

key to execute

editing.

This is a message for confirming if
editing can really be executed.

(blinking)

Release the

“WRITE PROTECT”

condition.

The Mini Disc is in the

“WRITE PRO-

TECT”

condition.

PROTECTED

Load a recordable Mini Disc.

A playback-only Mini Disc is loaded.

PLAY ONLY

CAN'T LOAD

A CD corresponding to CD-TEXT has
not been inserted into the CD player.

The CD player is not connected via an
optical fiber cable.

Set a CD corresponding to CD-TEXT
into the CD player.

Connect the CD player with an op-
tical fiber cable and match the REC
INPUT of the MD recorder.

CAN'T COPY

Title copying may not be possible,
depending on the disc.

The titles of this disc can not be
copied. (Replace the disc.)

Summary of Contents for DM-SE7





















































Search results

Summary of Contents for DM-SE7

Reviews:

Brands by name

Popular brands

Kenwood DM-SE7, Instruction Manual

Search results

Summary of Contents for DM-SE7

Reviews:

Brands by name

Popular brands