Controlling Audio
66
■
FREQ (High Pass)
High Pass Filter adjustment. (When tweeter is
selected on Speaker Select screen)
■
HPF FREQ, LPF FREQ (Band Pass)
Band Pass Filter adjustment. (When mid
range speaker is selected on Speaker Select
screen)
■
FREQ (Low Pass)
Low Pass Filter adjustment. (When woofer is
selected on Speaker Select screen)
■
Slope*
3
Sets a crossover slope.
■
Gain
Sets gain of each speaker.
■
Phase Inversion*
2
Sets the phase of tweeter, mid range, and
woofer output.
Check
[
Phase Inversion
]
to shift the phase
180 degrees.
NOTE
• For how to switch to the 3-way speaker system,
see
3 way speaker system setup (P.66)
Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
Ñ
3 way speaker system setup
Select the appropriate crossover network
mode according to the speaker system (2-way
speaker system or 3-way speaker system).
1
Press the
[
HOME
]
button.
h
h
HOME screen appears.
2
Touch
[
]
.
h
h
Source selection screen appears.
3
Touch
[
STANDBY
]
.
4
Press the
[
G
]
/
[
AV
]
button and the
[
S
]
button for 1 second at the same time.
h
h
Speaker system select screen appears.
5
Select the crossover network mode.
h
h
A confirmation screen appears.
6
Touch
[
Yes
]
.
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Zone Control
– Fader of Controlling General Audio
– Front focus of Listening Position/ DTA
– Select the speakers to output the sound from
cell-phone of Blutooth HF/Audio
– Beep of User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
Controlling General Audio
1
Press the
[
MENU
]
button.
h
h
Popup menu appears.
2
Touch
[
Audio
]
.
h
h
Audio screen appears.
3
Touch
[
Fader / Balance
]
.
4
Set each item as follows.
