Kenwood DDX8022BT Instruction Manual Download Page 82

Page: 82 / 108

DNX8220BT/DDX8022BT

Registering Bluetooth Unit

Registers the Bluetooth unit to be connected.

Display the Connect Device List screen

Search for a Bluetooth unit

Displays the registered Bluetooth unit.

Displays the busy service in blue. Displays
the available service in gray.

Scrolls the name of the Bluetooth unit.

Searches for Bluetooth unit.

Registers Bluetooth unit that cannot be

registered by normal register (pairing)
operation.

Returns to the previous screen.

⁄

• A new device cannot be registered if there are 5

registered Bluetooth units. Delete unnecessary
registration. See <Deleting Bluetooth Unit> (page 84).

Select the Bluetooth unit to register

Displays the searched Bluetooth unit.

Scrolls the name of the Bluetooth unit.

Starts search.

Cancels searching of Bluetooth unit.

Scrolls.

Returns to the previous screen.

Setup Menu

Enter PIN code

Enter the PIN code specified for the Bluetooth
unit to register.

Enters a code number.

Cancels registration of PIN code.

Enters PIN code.

Clears the code number.

⁄

• You can also register from the Bluetooth unit side. For

the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 83).

• If the error message appears even though the PIN code

is correct, try <Registering Special Bluetooth Unit> (page
83).

B64-4093-00̲00̲EN.indb 82

08.2.22 0:50:36 PM

Summary of Contents for DDX8022BT













































































































Search results

Summary of Contents for DDX8022BT

Reviews:

Brands by name

Popular brands

Kenwood DDX8022BT, Instruction Manual

Search results

Summary of Contents for DDX8022BT

Reviews:

Brands by name

Popular brands