Kenwood DDX7031BT, Instruction Manual

Page: 4 / 58

66 7
Return to the Top page
Basic Operations
Return to the Top page
Basic Operations
F
unctions Of The Buttons On The Front Panel
DNX7310BT/DNX7310BTM/DDX7031BT
1
2 3
4
5
6
7 8 9
11
10
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX7310BT and DNX7310BTM :
DDX7031BT :
If above icon is showed, read the article applicable to the unit you use.
How To Insert An SD Card
1) Press
8
< 0 > button for 1 second.
The panel fully opens.
2) Hold the SD card as the diagram in the right and
insert it into the slot until it clicks.
●
To eject the card:
Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.
B
asic Operations
Number Name Motion
1
fi
(Reset) • If the unit or the connected unit fails to operate properly, the unit
returns to factory settings when this button is pressed (P.101) .
2
ATT • Switches attenuation of the volume on/off.
• Pressing for 1 second turns the screen off.
3
∞
,
5
(Vol) Adjusts volume.
4
AUD • Displays Graphic Equalizer screen (P.88) .*
• Pressing for 1 second switches camera view display on/off.
5
NAV
• Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
5
AV
• Displays the source control screen.
• Pressing for 1 second switches AV out sources.
6
MENU • Displays the Top Menu screen (P.16) .
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
7
TEL • Displays the Hands Free screen (P.54) .
• Pressing for 1 second displays the Screen Control screen.
8
0
(Eject) • Ejects the disc.
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
9
Remote
Sensor • Receives the remote control signal.
• You can enable or disable this feature by Remote Sensor
(P.70) .
• If [Remote Sensor] is set to off, the remote control of TV reception is
rejected.
10
Disc insert
slot A slot to insert a disc media.
11
SD card slot An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
For DDX7031BT, you can play audio/visual file in the card.
* The display may not switch to the Graphic Equalizer screen in some conditions.
0
Labelled
side