DDX6019/6029/6029Y/6039
26
EEPROM writing-in completion OK/NG screen
Write OK/NG
Return
Key specification
Return: Move on to Test Mode Main screen.
Note: If NG, go into the test mode again and repeat from
the 1st step.
●
Hposi screen
• Adjust each screen’s horizontal display position (refer to the
separate sheet for more detail).
Each Hposi adjustment screen
< <
< <
> >
> >
Next
Adjustment item
Step value
Adjustment item
Step value
Cancel
Key specification
Next: To the next Hposi adjustment screen, or when in NAVI
screen, start EEPROM writing.
<<: Screen moves toward the left.
>>: Screen moves toward the right.
Cancel: Move on to Test Mode Main screen.
Note: The top row of the first adjustment screen (Graphic)
does not need to be adjusted.
Hposi OK/NG
Return
EEPROM writing-in completion OK/NG screen
Key specification
Return: Move on to Test Mode Main screen.
Note: If NG, go into the test mode again and repeat from
the 1st step.
●
MECHA ADJ screen
• After installing the mechanism position adjustment jig, ad-
just the panel mechanism position.
MECHA ADJ screen
Key specification
MECHA Adjust: Start mechanism position adjustment.
1: Set the mechanism position (Tilt) to “1”.
Return: Move on to Test Mode Main screen.
While in MECHA Adjust process
MECHA Adjust
Return
Full Close AD :
∗∗∗
H
Full Open AD :
∗∗∗
H
1
MECHA Adjust
Return
1
Mecha Adjusting
TEST MODE
