38
BLUETOOTH
BLUETOOTH
Pairing a Bluetooth device from this unit using a
PIN code (for Bluetooth 2.0)
1
Display the
<Bluetooth Setup>
screen.
(Page
37)
2
3
Search for the available devices.
• To cancel searching for devices, press
[Cancel]
.
4
Select the device you want to pair.
The pairing request message is displayed on the
screen. Accept the request.
• If a PIN code is required, enter “0000” (initial).
❏
Connecting/disconnecting a registered
Bluetooth device
Two devices can be connected simultaneously.
1
Display the
<Bluetooth Setup>
screen.
(Page
37)
2
3
Select the device you want to connect (
1
),
then press
[Connection]
(
2
).
4
Select
[ON]
or
[OFF]
for the target.
:
Mobile phone
: Audio device
• The status is shown as follows:
– “Connected”: A connection has been
established.
– “Connect Ready”: A connection can be
established.
– “Disconnected”: No connection is
established.
• Press
[Change]
for
<APP Setup>
to display
the
<APP Settings>
screen to configure
settings for applications of iPod/iPhone/
Android. (Page
44)
• When a Bluetooth mobile phone is connected,
the signal strength and battery level are displayed
when the information is acquired from the device.
❏
Deleting a registered Bluetooth device
1
Display the
<Bluetooth Setup>
screen.
(Page
37)
2
3
Select a device to delete (
1
), then press
[Remove]
(
2
).
A confirmation message appears. Press
[Yes]
.
DDX̲Mid̲E.indb 38
DDX̲Mid̲E.indb 38
2015/12/24 14:02
2015/12/24 14:02
