Kenwood DDX416BT, Instruction Manual

Page: 47 / 76

ENGLISH 47
SETTINGS SETTINGS
❏
Setting the speakers—car type,
speaker size and crossover frequency
1
Display the
<Car Setting>
screen.
On the Home screen:
2
Select a car type (
1
), select the location
of the speakers (
2
) , then display the
<Speaker Select>
screen (
3
).
3
Select the speaker type (
1
), select the size
of the selected speaker (
2
), then display
the
<X’over>
screen (
3
).
• When a speaker is not connected, select
<None>
.
• When setting the front speakers, also select
the speaker size for <Tweeter> .
4
Adjust the crossover frequency of the
selected speaker.
<TW Gain (L)> /
<TW Gain (R)>
Adjusts the output volume of
the tweeter (left/right).* 1 * 2
<TW FREQ> Adjusts the crossover
frequency for the tweeter.*
1
*
2
<Gain>
Adjusts the output volume of
the selected speaker.
<HPF FREQ> Adjusts the crossover
frequency for the front or rear
speakers (high pass filter).*
3
<LPF FREQ> Adjusts the crossover for the
subwoofer (low pass filter).*
4
<Slope>
Adjusts the crossover slope.*
5
<Phase> Selects the phase for the
subwoofer.*
4
* 1 Appears only when the front speakers are selected.
*
2
Adjustable only when
<Tweeter>
is set to
<Small>
,
<Middle> , or <Large> on the <Speaker Select>
screen.
* 3 Appears only when the front or rear speakers are selected.
*
4
Appears only when the subwoofer is selected.
*
5
Not adjustable when <HPF FREQ> or <LPF FREQ> is set to
<Through> .
2016DDX-Entry̲M.indb 47 2016DDX-Entry̲M.indb 47 2015/09/30 13:59 2015/09/30 13:59