background image

Settings

Settings

<Supreme>

*2

Restores the sound lost due to audio compression to a 
realistic sound.
• 

OFF

/

ON

 (Initial)

<Realizer>

Virtually makes the sound more realistic using the 
Digital Signal Processor (DSP) system. Select the sound 
level.
• 

OFF

 (Initial)/

Level 1

/

Level 2

/

Level 3

<Stage EQ>

Moves the center of the sound to the lower or higher 
point. Select the height.
• 

OFF

 (Initial)/

Low

/

Middle

/

High

*1  You cannot change the setting when “Radio” or “DAB” (only for 

DDX4018DAB) is selected as the source.

*2  This function works only when “DISC”/ “USB”/ “iPod”/ 

“Android™” is selected as the source.

<Fader/Balance>

Touch 

[

J

]

/

[

K

]

/

[

H

]

/

[

I

]

 or drag the 

 mark to adjust.

<Fader>

Adjusts the front and rear speaker output balance. 
When using a two-speaker system, set the fader to the 
center (

0

).

• 

F15

 to 

R15

 (Initial: 

0

)

<Balance>

Adjusts the left and right speaker output balance.
• 

L15

 to 

R15

 (Initial: 

0

)

To clear the adjustment:

 Touch 

[Center]

.

    Setting the speakers and crossover 

frequency

Select a car type (

1

), select the location 

of the speakers (

2

), then display the 

<Speaker Select> screen (

3

).

•  Speaker location selection is available only when 

<X’over Network>

 is set to 

[2way]

.

Select the speaker type (

1

), select the size 

of the selected speaker (

2

), then display 

the <X’over> screen (

3

).

•  If a speaker is not connected, select 

<None>

.

•  When setting the front speakers, also select the 

speaker size for 

<Tweeter>

.

 <Speaker/X’over>

Before making any settings for the speakers and 
crossover frequency, select the appropriate crossover 
network mode according to the speaker system (2-way 
speaker system or 3-way speaker system).
•  Connecting 3-way speakers with 2-way crossover 

network mode selected may damage the speakers.

    Crossover network mode settings

Display the source/option selection screen.

On the Home screen, touch as follows:

Put the unit in standby.

On the source/option selection screen, touch as 
follows:

Press 

M

 and MENU on the monitor panel 

at the same time to display the <X’over 
Network> screen.

Select the crossover network mode.

[2way]

Select this when connecting speakers 
in a 2-way system (front/rear).

[3way]

Select this when connecting speakers 
in a 3-way system (tweeter/mid 
range/woofer).

A confirmation message appears. Touch 

[Yes]

 to 

confirm.

33

ENGLISH

00_DDX318BT_EN_ENG.indb   33

00_DDX318BT_EN_ENG.indb   33

13/6/2017   9:43:28 AM

13/6/2017   9:43:28 AM

Summary of Contents for DDX318BT

































































Reviews: