Kenwood CS-X70, Instruction Manual

Page: 4 / 20

ENGLISH
4
EN
CS-X70 1263-00_00
Connections
Note on operation
The speaker system’s peak input power is indicated in the specifications. To avoid speaker damage, never run the
speaker at power levels exceeding this limit.
Note on connection
1. Be sure to turn off your amplifier before connecting or disconnecting speaker.
2. This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your
amplifier or receiver (audio video control center) is able to work with 8-ohm speaker.
• Never short the (+) and (–) speaker wire’s conductors together.
• Do not reverse (+) and (–) connections. Reversal of polarities may result in unnatural sound.
System ................. 4 way 4 speakers (Magnetically shielded)
Enclosure ....................................... Acoustic Air Suspension
Woofer .................................... 80 mm (3") Cone type × 2
Midrange ...................................... 80 mm (3") Cone type
Tweeter ...................................... 19 mm(3/4") Dome type
Nominal Impedance ....................................................... 8 Ω
Peak Input Power ........................................................... 130 W
Sensitivity .................................................. 80 dB / W at 1 m
Frequency Response .................................... 60 Hz~100 kHz
Specifications
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without
notice.
Dimensions
Width .................................................. 420 mm (16-9/16")
Height (Speaker body only) ........................... 102 mm (4")
Height (Including the feet) ...................... 134 mm (5-1/4")
Depth ...................................................... 136 mm (5-3/8")
Net Weight ............................................ 3.7 kg (8.2 lb) /piece
Accessories
Speaker wire (4 m (13 ft)) ............................................... 1
Cushion ........................................................... 4 (1 sheet)
Foot (long) ...................................................................... 2
Foot (short) .................................................................... 2
GREEN WHITE RED
R L CENTER FRONT A
-
+
Wire with white line
3
Secure
1
Loosen
2
Insert the conductor
Speaker terminals
(Amplifier or Audio Video control center)
The speaker wire can also be connected to the speaker by
using banana plugs which are commercially available in
audio stores.
To use the banana plug connection, tighten the screws on
the speaker terminals before inserting the banana plug.
1 2