20
13.2 Automatic connection after pairing has already taken place
If the source switches
"Bluetooth Audio"
or the radio is switched off, the BLUETOOTH connection is
disconnected. If the radio is switched on again or switched back to the
"Bluetooth Audio"
source,
an automatic connection is established.
Note:
If an automatic connection is not possible, please proceed as follows:
Press the
<MENU>
button and select
"View details"
. Then open the
"Paired Device List"
, to
select and pair the desired terminal device. Press the
<OK>
button to establish the connection and
"Connected"
appears briefly on the display.
13.3 Pair another terminal device
To connect another terminal device to the radio, please press the
<MENU>
button and select
"Setup
Bluetooth"
. This will disconnect the current connection.
Now proceed as when you first connect a terminal device. Afterwards, this terminal device is also
saved in the list of paired devices and can be selected via the corresponding menu (see above). A
maximum of 8 devices can be saved.
13.4 Interrupting the BLUETOOTH connection
If you like to disconnect the connection to a paired device, please select
"MENU"
and then
"Setup
Bluetooth"
. The radio then switches back to pairing mode.
14. Analogue connections
14.1 Aux-in
To play music, external devices such as e.g. MP3 players, DVD players or game consoles can be
connected. To do this, please select the source
"Aux-In"
in the main menu.
14.2 Headphone port
Use a commercially available headset with 3.5 jack plug.
To prevent possible hearing damage, do not listen at high volume for long periods.
15. Sleeptimer function
With this function you can switch the radio to standby mode automatically after a set period of time.
You can choose between 15, 30, 45, 60, 90 or 120 minutes,
"Sleep off"
deletes the previously set
period of time. To do this, press the
<MENU>
button while the audio source is selected and select
"Main menu"
. Use the
<UP>
or
<DOWN>
to navigate in the menu and select
"Sleep"
. Use the
<UP>
or
<DOWN>
button in the
"Set sleep time"
menu to select the desired time period and
confirm with the
<OK>
button. Exit the menus again with the
<MENU>
button.
The remaining time is shown in the bottom left of the display, with minutes running backwards.
