Kenwood CK 704, Instructions For Use Manual, Page: 28 / 44

28
650 mm
500 mm
450 mm
50 mm
air flow
Fig. 9.1
9 - INSTALLATION
INSTALLATION
The cooker must be installed by a qualified technician and in compliance with local
safety standards.
This cookers has class “2/1” overheating protection so that it can be installed next to a
cabinet.
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered syntetical material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a gap
of at least 50 mm must be left between the side of the cooker and the furniture.
Curtains must not be fitted immediately behind the appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below.
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent it
from falling out.
The appliance may be installed in a kitchen, a kitchen/diner or bed-sitting room, but not in a
room or space containing a bath or shower.
The appliance must not be installed in a bed-sitting room of less than 20 m
3
.
The appliance is designed and approved for domestic use only and should not be installed in
a commercial, semi commercial or communal environment.
Your product will not be guaranteed if installed in any of the above environments and could
affect any third party or public liabi lity insurances you may have.