Kenwood CK 304 FS, Instructions For Use Manual, Page: 24 / 40

8 - INSTALLATION
Fig. 8.1
This cooker has class “2/1” overheating protection so that it can be installed next
to a cabinet.
The cooker must be installed by a qualified technician and in compliance with
local safety standards.
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop,
a gap of at least 200 mm must be left between the side of the cooker and the furniture.
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered synthetic material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
If the cooker is located on a pedestal it is necessary to provide safety measures to pre-
vent falling out.
It is essential that the cooker is positioned as stated below.
24
65
0
m
m
500 mm
45
0
m
m
200 mm