29
ANTI-TILT BRACKET
Important!
To restrain the appliance and prevent it tipping accidentally, the anti-tilt bracket sup-
plied must be fitted according to the instructions below.
To fit the anti-tilt bracket:
1 . After you have located where the cooker is to be positioned, mark on the wall and on
the floor the place where the four screws of the anti-tilt bracket have to be fitted.
Please follow the indications given in fig. 9.3.
2 .
Drill four 8mm diameter holes for the fixing screws (two in the wall and two in the floor-
see Fig .9 .3) and insert the plastic plugs supplied .
Important!
Before drilling the holes, check that you will not damage any pipes or electrical
wires.
3 .
Attach the anti-tilt bracket to the floor and rear wall using the four screws supplied, as
shown in Fig . 9 .3 .
4 . After attaching the anti-tilt bracket securely, slide the cooker into place . Ensure that the
rear right foot slides under the bracket, as shown in Fig . 9 .3 .
ANTI-TIP STABILITY
DEVICE FIXING
Rear right
feet of range
Anti-tip
stability device
Fig. 9.3
